|
Short #1 Phillips 1.
Date: 12/29/2009
Views: 2735
|
|
|
Drawer closer 2.
Date: 08/17/2010
Views: 2830
|
|
|
Anti door warping 5.
Date: 11/16/2009
Views: 2589
|
|
|
Door hinge rebates 22.
Date: 11/03/2009
Views: 2023
|
|
|
This is the gap at high point on port door.
Date: 10/15/2009
Views: 2733
|
|
|
Holes are only 1/16" to allow proper countersinking of top tang.
Date: 10/12/2009
Views: 3279
|
|
|
Kingsley_Hurst_Door_3rd_locking_point_2
Date: 07/28/2009
Views: 3070
|
|
|
Filled with Aeropoxy light starboard.
Date: 09/03/2009
Views: 2969
|
|
|
Used a 1/8" piloted 100 degree counterbore to counterbore hinges.
Date: 10/14/2009
Views: 2939
|
|
|
Working_on_the_Door_Don_t_cut_bottoms_of_wells_out
Date: 07/28/2009
Views: 3185
|
|
|
Allow 3mm glass to recess a little further.
Date: 06/26/2009
Views: 4379
|
|
|
Door isn't closed all the way, contact area is low and inboard.
Date: 12/12/2009
Views: 2755
|
|
|
Door mechanism cover 1.
Date: 11/01/2009
Views: 2271
|
|
|
Door hinge rebates 27.
Date: 11/04/2009
Views: 2271
|
|
|
Port front spacer complete and held in place with double sticky tape.
Date: 10/12/2009
Views: 2680
|
|
|
Port aft tang/rebate 5.
Date: 10/16/2009
Views: 2499
|
|
|
Outboard strut anchor 4.
Date: 12/01/2009
Views: 2849
|
|
|
Port front enlarging 1/8" hole.
Date: 10/08/2009
Views: 2653
|
|
|
Supplied nuts are too thick for the thin side of the tang 2.
Date: 10/14/2009
Views: 2723
|
|
|
Door mechanism cover install 4.
Date: 11/10/2010
Views: 5043
|
|