|
Fin rib conduit 2.
Date: 04/14/2009
Views: 2642
|
|
|
DSCN8335
Date: 09/19/2010
Views: 2732
|
|
|
dsc08633
We had to put the plane somewhat down near the trailer with the main up so that we could get the right contour for the ribs. Reminds me of a B-17 with the main just showing.
Date: 04/14/2012
Views: 6323
|
|
|
DSC00730
Date: 12/31/1969
Views: 7352
|
|
|
13062002131354_G
Date: 12/31/1969
Views: 2183
|
|
|
IMG_7290
Bonded in the foam and cork support for the "ledge" at the front of the tank.
Date: 02/14/2014
Views: 4030
|
|
|
20141102_162118
Cut it out.
Date: 11/02/2014
Views: 54572
|
|
|
dscn0369
Date: 12/31/1969
Views: 3573
|
|
|
Tie-bar 19.
Date: 11/14/2010
Views: 3239
|
|
|
05072003121836_G
Date: 12/31/1969
Views: 3066
|
|
|
Broken edge of starboard aileron 3.
Date: 09/28/2010
Views: 2809
|
|
|
SD20S side by side Flight Crafters unit.
Date: 10/30/2007
Views: 4066
|
|
|
01012009246_G
Date: 10/27/2009
Views: 4279
|
|
|
Fuel_System_25
Date: 09/16/2007
Views: 3496
|
|
|
dsc09022
Here you see I used bondo on the shims and screwed them down into the block. The shims made sure the guide was level. Also note the hole drilled in the Aluminum angle and the shim. This is where I fixed the guide for the curing stage to ensure nothing
Date: 01/22/2013
Views: 7505
|
|
|
IMG_0054post
Date: 09/01/2010
Views: 2618
|
|
|
Flap_Motor_Installation_07
Date: 11/27/2007
Views: 3073
|
|
|
IMG_0247post
Date: 08/11/2009
Views: 3239
|
|
|
DoorSupportMod07Ann
Date: 05/05/2004
Views: 1931
|
|
|
DSCN6069
Date: 10/11/2009
Views: 2778
|
|