|
Contact area for hardware made flat.
Date: 01/17/2010
Views: 3154
|
|
|
Mounting UpStops 2
Date: 12/27/2013
Views: 6637
|
|
|
IMG_6303
Date: 12/23/2016
Views: 4570
|
|
|
Before closing E-bus switch, open Alternator switch first.
Date: 03/01/2011
Views: 1701
|
|
|
DSCF0615
Date: 07/25/2003
Views: 3187
|
|
|
img0351copy
Date: 07/29/2007
Views: 1939
|
|
|
112302_cowelwhite
Date: 12/31/1969
Views: 2575
|
|
|
DSCF0024
Date: 08/03/2009
Views: 2496
|
|
|
Panel mounted after upper right side was buttered with Flox/Q-Cel.
Date: 01/15/2010
Views: 3234
|
|
|
DSCN5369Ann
Date: 12/28/2006
Views: 2872
|
|
|
05122002192409_G
Date: 12/31/1969
Views: 2265
|
|
|
IMG_2307
Cardboard cutouts and templates were used to shape and size the panels and to decide where instruments should go.
Date: 10/06/2011
Views: 4068
|
|
|
Aft sill cover 20.
Date: 09/03/2010
Views: 3026
|
|
|
Starboard wing 7.
Date: 06/12/2009
Views: 2695
|
|
|
Ivan_ja_Jos_4
Date: 07/19/2007
Views: 2501
|
|
|
smDSCN1680
Date: 12/31/1969
Views: 6961
|
|
|
P8250029
Date: 08/25/2002
Views: 24083
|
|
|
Calliper 2
The best solution is shown in this pic from Mike Parkin. A Banjo fitting. The Banjo bolt is straight threads, it lies low, out of the way of grabby things and is stoutly attached. So, I have a number of bits on order from various suppliers in an attem
Date: 06/23/2009
Views: 2864
|
|
|
Baggage_Area_03_001
Date: 06/03/2007
Views: 2994
|
|
|
DSCN5603Ann
Date: 03/06/2007
Views: 2828
|
|