|
|
3" wide x 1/8" thick 4130 Chrome Moly for bracket
Date: 11/28/2013
Views: 6400
|
|
|
Now you can see lightening holes onthe small offsetting plate
Date: 11/28/2013
Views: 6337
|
|
|
|
1 side painted with top coat
Date: 11/28/2013
Views: 5594
|
|
|
ESTM-20 Specification Sheet
Date: 11/28/2013
Views: 6202
|
|
|
|
2011 and 4032 aluminium stock for spacers
Date: 11/28/2013
Views: 7174
|
|
|
Self Etching Primed
Date: 11/28/2013
Views: 5754
|
|
|
|
Steve Hagar
Date: 05/31/2013
Views: 6406
|
|
|
Spar clamp that allows a little fore and aft movement
Date: 11/27/2013
Views: 7579
|
|
|
|
Glass in reinforcement
Date: 11/27/2013
Views: 5454
|
|
|
Results of fitting in situation.
Date: 11/27/2013
Views: 6235
|
|
|
|
Air-brake cables were used to determine feasibility and length needed
Date: 11/27/2013
Views: 6549
|
|
|
Igus bearings
Date: 11/27/2013
Views: 9830
|
|
|
|
Drill jig and plywood insert
Date: 11/27/2013
Views: 5890
|
|
|
You can see the locknut contacting
Date: 11/27/2013
Views: 6253
|
|
|
|
The shoulder of my spacers allows for a tiny bit more deflection than without
Date: 11/27/2013
Views: 5943
|
|
|
A Flap Push-Rod is not going to work post Mod 78
Date: 11/27/2013
Views: 4307
|
|
|
|
Just needs a pullin
Date: 11/27/2013
Views: 6781
|
|
|
Steel for front mount
Date: 11/27/2013
Views: 8811
|
|
|
|
Nice-a-fit!
Date: 11/27/2013
Views: 5584
|
|
|
OK, we are ready for in situation fitting to get correct length and angle of 1" tube
Date: 11/27/2013
Views: 5612
|
|
