|
|
The threaded portion of my "thunk" fits nicely inside this spacer
Date: 12/13/2013
Views: 10379
|
|
|
Mill round slot in master cylinder 6 of 12
Date: 12/23/2013
Views: 10249
|
|
|
|
Front HardPoint 1
Date: 12/27/2013
Views: 10065
|
|
|
Front HardPoint 2
Date: 12/27/2013
Views: 9997
|
|
|
|
Ready to install nut-plates
Date: 11/27/2013
Views: 9957
|
|
|
Series 6 Push-Pull cable Weight and Length
Date: 12/16/2013
Views: 9924
|
|
|
|
Mill round slot in master cylinder 3 of 12
Date: 12/23/2013
Views: 9895
|
|
|
Spar clamp that allows a little fore and aft movement
Date: 11/27/2013
Views: 9558
|
|
|
|
The magic number is 1.990" from the forward pillow block bearing to the grove.
Date: 12/13/2013
Views: 9524
|
|
|
You really can't see with the pillow block in place, but lightening holes under contact area
Date: 11/27/2013
Views: 9389
|
|
|
|
Emergency Maneuver that starts with Heim? 2 of 13
Date: 12/16/2013
Views: 9388
|
|
|
Oops, several dents being repaired in Port seat base, Q-Cel, 1 BID, Peel-Ply
Date: 11/30/2013
Views: 9380
|
|
|
|
2011 and 4032 aluminium stock for spacers
Date: 11/28/2013
Views: 9378
|
|
|
Washers countersunk and screws shouldered
Date: 12/31/2013
Views: 9372
|
|
|
|
1/2" clamps that allow cable to slide 1 of 2
Date: 12/16/2013
Views: 9364
|
|
|
Just needs a pullin
Date: 11/27/2013
Views: 9361
|
|
|
|
Rod end clevis fork ground down to 1.975" (again minimum 9.5 threads of engagement)
Date: 12/13/2013
Views: 9355
|
|
|
Emergency Maneuver that starts with Heim? 11 of 13
Date: 12/16/2013
Views: 9342
|
|
|
|
Coupler dimensions
Date: 12/16/2013
Views: 9306
|
|
|
Shot of 1/4" hardware spacers
Date: 11/29/2013
Views: 9294
|
|
