|
|
Emergency Maneuver that starts with Heim? 13 of 13
Date: 12/16/2013
Views: 7859
|
|
|
Front Cable Mount with Lever in Down Position
Date: 12/12/2013
Views: 7352
|
|
|
|
Besides a little paint and Redux, Flight Ready
Date: 12/16/2013
Views: 7756
|
|
|
Cut down 1" aft threaded rod to .700"
Date: 12/13/2013
Views: 7512
|
|
|
|
Mill round slot in master cylinder 6 of 12
Date: 12/23/2013
Views: 9604
|
|
|
You can see I left a little space so the spacer can pinch the bearing when the nut is tightened
Date: 12/13/2013
Views: 6818
|
|
|
|
Oops, several dents being repaired in Port seat base, Q-Cel, 1 BID, Peel-Ply
Date: 11/30/2013
Views: 8745
|
|
|
I'm going to Redux the nut in place and Redux/Flox the thread extender hang-over
Date: 12/13/2013
Views: 6445
|
|
|
|
Air-brake cables were used to determine feasibility and length needed
Date: 11/27/2013
Views: 7717
|
|
|
Emergency Maneuver that starts with Heim? 5 of 13
Date: 12/16/2013
Views: 7116
|
|
|
|
5.4 oz. for bracket, pillow block and pillow block mounting hardware
Date: 11/29/2013
Views: 8665
|
|
|
Mill round slot in master cylinder 9 of 12
Date: 12/23/2013
Views: 8099
|
|
|
|
Results of fitting in situation.
Date: 11/27/2013
Views: 7753
|
|
|
Besides a little paint and Redux, Flight Ready
Date: 12/16/2013
Views: 12376
|
|
|
|
Mill round slot in master cylinder 2 of 12
Date: 12/23/2013
Views: 7709
|
|
|
Oops, fixed a dent I made with a C-Clamp when testing spar Adel clamp bracket, Q-Cel, 1 BID and Peel-Ply
Date: 11/30/2013
Views: 8271
|
|
|
|
Emergency Maneuver that starts with Heim? 1 of 13
Date: 12/16/2013
Views: 8066
|
|
|
OK, we are ready for in situation fitting to get correct length and angle of 1" tube
Date: 11/27/2013
Views: 6942
|
|
|
|
Action of Flap Cross Tube .mov
Date: 12/13/2013
Views: 5331
|
|
|
A shot to show where the threads end
Date: 12/16/2013
Views: 6986
|
|
