|
|
Drill jig
Date: 11/27/2013
Views: 7240
|
|
|
1/4-28 jam nuts
Date: 11/27/2013
Views: 7299
|
|
|
|
Oops, a few air bubles on aft mount reinforcemelay-up, drilled holes, filled with Aeropoxy, plugged with dry flox and Peel-Ply
Date: 11/30/2013
Views: 8455
|
|
|
1 side painted with top coat
Date: 11/28/2013
Views: 7137
|
|
|
|
Reinforcement
Date: 11/27/2013
Views: 10100
|
|
|
Now you can see lightening holes onthe small offsetting plate
Date: 11/28/2013
Views: 7927
|
|
|
|
Made spacer a few thousands shorter than the pillow block hole
Date: 11/29/2013
Views: 7742
|
|
|
Straight ahead
Date: 11/27/2013
Views: 8235
|
|
|
|
Ready to install nut-plates
Date: 11/27/2013
Views: 9716
|
|
|
Half the weight was eliminated since I first cut steel
Date: 11/27/2013
Views: 8070
|
|
|
|
Drill jig and plywood insert
Date: 11/27/2013
Views: 7612
|
|
|
ESTM-20 Specification Sheet
Date: 11/28/2013
Views: 7858
|
|
|
|
Besides a little paint and Redux, Flight Ready
Date: 12/16/2013
Views: 12698
|
|
|
Ready for final assembly
Date: 11/29/2013
Views: 7162
|
|
|
|
1/8" 4130 bracket
Date: 11/27/2013
Views: 7536
|
|
|
Oops, fixed a dent I made with a C-Clamp when testing spar Adel clamp bracket, Q-Cel, 1 BID and Peel-Ply
Date: 11/30/2013
Views: 8536
|
|
|
|
3.2 oz. for aft bracket
Date: 11/29/2013
Views: 7564
|
|
|
The center hole was tapped and used for 1st test mount, a big lightening hole will eliminate it
Date: 11/27/2013
Views: 8427
|
|
|
|
Self Etching Primed
Date: 11/28/2013
Views: 7328
|
|
|
Shot of 1/4" hardware spacers
Date: 11/29/2013
Views: 8981
|
|
