|
|
Mill round slot in master cylinder 2 of 2
Date: 12/24/2013
Views: 15770
|
|
|
I failed a bearing on purpose
Date: 11/27/2013
Views: 15195
|
|
|
|
FLAP PUSH-PULL CABLE: JUST "MAKE IT WORK"
Date: 12/05/2013
Views: 13689
|
|
|
Pretty much the front is flight ready.
Date: 12/16/2013
Views: 10520
|
|
|
|
1/2" clamps that allow cable to slide 2 of 2
Date: 12/16/2013
Views: 10507
|
|
|
The threaded portion of my "thunk" fits nicely inside this spacer
Date: 12/13/2013
Views: 10353
|
|
|
|
Series 6 Push-Pull cable Weight and Length
Date: 12/16/2013
Views: 9898
|
|
|
The magic number is 1.990" from the forward pillow block bearing to the grove.
Date: 12/13/2013
Views: 9507
|
|
|
|
Emergency Maneuver that starts with Heim? 2 of 13
Date: 12/16/2013
Views: 9368
|
|
|
1/2" clamps that allow cable to slide 1 of 2
Date: 12/16/2013
Views: 9341
|
|
|
|
Rod end clevis fork ground down to 1.975" (again minimum 9.5 threads of engagement)
Date: 12/13/2013
Views: 9331
|
|
|
Emergency Maneuver that starts with Heim? 11 of 13
Date: 12/16/2013
Views: 9322
|
|
|
|
Coupler dimensions
Date: 12/16/2013
Views: 9288
|
|
|
Emergency Maneuver that starts with Heim? 12 of 13
Date: 12/16/2013
Views: 9257
|
|
|
|
Cable Happy in Spar Tunnel 1
Date: 12/12/2013
Views: 9255
|
|
|
1/2" ball end-mill on order (McMaster) to to mill a pocket in the brake master cylinder directly above the mounting holes
Date: 12/13/2013
Views: 8763
|
|
|
|
Cable Happy in Spar Tunnel 2
Date: 12/12/2013
Views: 8729
|
|
|
Emergency Maneuver that starts with Heim? 1 of 13
Date: 12/16/2013
Views: 8675
|
|
|
|
Emergency Maneuver that starts with Heim? 4 of 13
Date: 12/16/2013
Views: 8594
|
|
|
Cable Happy near Fuel Selector and below Air-Brake Cable 1
Date: 12/12/2013
Views: 8548
|
|
