|
|
Mill round slot in master cylinder 2 of 2
Date: 12/24/2013
Views: 16073
|
|
|
I failed a bearing on purpose
Date: 11/27/2013
Views: 15449
|
|
|
|
FLAP PUSH-PULL CABLE: JUST "MAKE IT WORK"
Date: 12/05/2013
Views: 13926
|
|
|
Pretty much the front is flight ready.
Date: 12/16/2013
Views: 10737
|
|
|
|
1/2" clamps that allow cable to slide 2 of 2
Date: 12/16/2013
Views: 10722
|
|
|
The threaded portion of my "thunk" fits nicely inside this spacer
Date: 12/13/2013
Views: 10592
|
|
|
|
Series 6 Push-Pull cable Weight and Length
Date: 12/16/2013
Views: 10153
|
|
|
The magic number is 1.990" from the forward pillow block bearing to the grove.
Date: 12/13/2013
Views: 9753
|
|
|
|
Emergency Maneuver that starts with Heim? 2 of 13
Date: 12/16/2013
Views: 9587
|
|
|
1/2" clamps that allow cable to slide 1 of 2
Date: 12/16/2013
Views: 9548
|
|
|
|
Emergency Maneuver that starts with Heim? 11 of 13
Date: 12/16/2013
Views: 9531
|
|
|
Coupler dimensions
Date: 12/16/2013
Views: 9519
|
|
|
|
Rod end clevis fork ground down to 1.975" (again minimum 9.5 threads of engagement)
Date: 12/13/2013
Views: 9514
|
|
|
Emergency Maneuver that starts with Heim? 12 of 13
Date: 12/16/2013
Views: 9489
|
|
|
|
Cable Happy in Spar Tunnel 1
Date: 12/12/2013
Views: 9465
|
|
|
1/2" ball end-mill on order (McMaster) to to mill a pocket in the brake master cylinder directly above the mounting holes
Date: 12/13/2013
Views: 8985
|
|
|
|
Cable Happy in Spar Tunnel 2
Date: 12/12/2013
Views: 8979
|
|
|
Emergency Maneuver that starts with Heim? 1 of 13
Date: 12/16/2013
Views: 8934
|
|
|
|
Emergency Maneuver that starts with Heim? 4 of 13
Date: 12/16/2013
Views: 8833
|
|
|
Overall shot of push-rod replacement
Date: 12/13/2013
Views: 8811
|
|
