|
|
DSCN4668small
Date: 08/27/2006
Views: 5438
|
|
|
IMG_7558post
I located a couple AN-6 adaptors to replace the hose barbs on the regulator. The adaptors are from Earl's (anplumbing.com), part #AT985006ERL for the black one and 995006ERL for the blue one. They are called AN "O" Ring Port Adaptors, AN-6 to
Date: 04/30/2010
Views: 5896
|
|
|
|
DoorLatch00Ann
Date: 05/04/2004
Views: 3103
|
|
|
IMG_2259Ann
Date: 10/06/2008
Views: 5241
|
|
|
|
IMG_0026post
Date: 08/30/2010
Views: 6829
|
|
|
IMG_7281
This picture illustrates how the new vent will be installed to obtain the best venting possible within the limits of the tank.
Date: 02/13/2014
Views: 8605
|
|
|
|
IMG_7762Ann
Date: 06/14/2008
Views: 4956
|
|
|
TailWheelMount09
Date: 02/02/2004
Views: 4746
|
|
|
|
img0829copy
Date: 07/29/2007
Views: 3933
|
|
|
TempInstRatingS
Date: 01/09/2005
Views: 5460
|
|
|
|
DoorMount37Ann
Date: 07/08/2004
Views: 4609
|
|
|
RudderHingePlace10
Date: 06/06/2003
Views: 6568
|
|
|
|
IMG_7760Ann
Date: 06/13/2008
Views: 5024
|
|
|
IMG_7977Ann
Date: 06/29/2008
Views: 4971
|
|
|
|
IMG_8157Ann
Date: 07/13/2008
Views: 4428
|
|
|
IMG_2685
I elected to make up a support structure from some 12" 1 1/2 x 1 1/2 wide aluminum angle i had in my aluminum bin. Cut two lengths 5 1/2" long and clamped them to the base well centered and drilled out holes matching the base. Attached them t
Date: 04/09/2012
Views: 4716
|
|
|
|
IMG_0053post
Date: 09/01/2010
Views: 5384
|
|
|
IMG_0150post
Date: 09/04/2010
Views: 4474
|
|
|
|
IMG_7535
Then we had a bit of drama as the sink developed a leak in the feed line.
Date: 03/20/2014
Views: 10486
|
|
|
AileronTrim06
Date: 08/19/2003
Views: 5111
|
|
