Brackets are mounted. Wayne is about half way done with PCB.
Date: 07/15/2010
Views: 3166
DSCF0007_001
Date: 07/27/2009
Views: 3097
CH8_1
Date: 12/31/1969
Views: 5505
Newest Image
EAA SITE
Date: 08/23/2023
Views: 119722
Most Viewed Image
Wing fillet fairing
Date: 05/23/2007
Views: 542634
IMG_0409Ann
Dived into the EIS wiring to check input wires to a number of functions. All seemed to be wired properly. Did find a discrepancy with the wiring instructions. One instruction sheet said to connect one RPM wire to the input and the other RPM wire to ground. Another instruction sheet said to connect RPM wire #13 to the input and RPM wire #26 to ground. Naturally, following the first instructions I connected #13 to ground and #26 to input. Gonna be ugly if I have to change those around.