|
|
Took a night to make 2 holes.
Date: 10/08/2009
Views: 6105
|
|
|
Here just a slight amount of steering is needed.
Date: 10/08/2009
Views: 5848
|
|
|
|
No problem dotting fuse, but you must careful study tip of shoot bolt.
Date: 10/08/2009
Views: 7887
|
|
|
Needs some steering.
Date: 10/08/2009
Views: 5580
|
|
|
|
Dab tip port door aft.
Date: 10/08/2009
Views: 6065
|
|
|
Port front enlarging 1/8" hole.
Date: 10/08/2009
Views: 6106
|
|
|
|
Non drying Prussian blue close at hand.
Date: 10/08/2009
Views: 10860
|
|
|
Planning how to best hang door.
Date: 10/08/2009
Views: 7767
|
|
|
|
Tried to cut door hinges in Makita chop saw.
Date: 10/07/2009
Views: 6942
|
|
|
Boy, under an oz each side.
Date: 10/07/2009
Views: 5948
|
|
|
|
Each hinge is slightly different in size, and pins are as large as they can be.
Date: 10/07/2009
Views: 7704
|
|
|
Good old hack saw was used to do the deed, indeed.
Date: 10/07/2009
Views: 6990
|
|
|
|
Port door lower aft repair and fill complete.
Date: 10/07/2009
Views: 7771
|
|
|
Sanded port door.
Date: 09/09/2009
Views: 5042
|
|
|
|
Sanded starboard door.
Date: 09/08/2009
Views: 5982
|
|
|
Filled and sanded shoot bolt bushing.
Date: 09/08/2009
Views: 6060
|
|
|
|
Composite rivets 3.
Date: 09/08/2009
Views: 5839
|
|
|
Filled glassed over hole on port door.
Date: 09/03/2009
Views: 5598
|
|
|
|
Filled with Aeropoxy light port.
Date: 09/03/2009
Views: 7104
|
|
|
Filled with Aeropoxy light starboard.
Date: 09/03/2009
Views: 6077
|
|
