Same shot different night, but this time complete!
Date: 07/17/2010
Views: 2963
IMG_0111
Date: 12/02/2006
Views: 3710
DSCN5266
Date: 06/24/2009
Views: 2754
Newest Image
EAA SITE
Date: 08/23/2023
Views: 102311
Ruudr_1
Installiation of port rudder stop outboard (because it will not fit inboard as per manual).
Scuff sanded 36 grit then 80 grit all.
Notice how thick gelcoat is here above stop, thickness of a nickel (a little thinner below stop).
Drilled and tapped three 4-40 holed in fuse.
Extra length of protuberance on rudder horn is going to meet up with my hacksaw and files.
Y9-05-23