Spar clamp that allows a little fore and aft movement
Date: 11/27/2013
Views: 4619
DSCF0635
Date: 07/28/2003
Views: 3915
41aileron_drive_jig
Date: 12/31/1969
Views: 2390
Newest Image
EAA SITE
Date: 08/23/2023
Views: 87718
DoorSupportMod07Ann
Removed the clamps from the bonded bushings. Adjusted the length and shaped the bushed ends. Opened the bushing holes to accept an AN4 washer-head bolt. Fitted the starboard side arms and bolted them together. Used a #21 drill and 10-24 tap to make a threaded hole in the upper arm for the gas strut fitting. Threaded the hole in the lower arm for the other fitting. Installed the gas strut and tested the unit.