|
|
110_1078_IMG
Date: 03/09/2004
Views: 5740
|
|
|
Gastester manual.pdf
Date: 03/11/2010
Views: 4962
|
|
|
|
DSCN6202Ann
Date: 07/04/2007
Views: 4970
|
|
|
dsc09066
Port side peel ply removed. Oh notice the caps in the sockets. What I did was take a block of foam and push it down in the socket, then took it back out and covered it with car wax. Once all the ribs are in I'll see how it worked.
Date: 01/25/2013
Views: 19553
|
|
|
|
DSCN8285
Date: 09/18/2010
Views: 6019
|
|
|
CH18_30
Date: 12/31/1969
Views: 3754
|
|
|
|
IMG_3577post
Next test, connect high pressure port from airbox directly to the "T" into the carb float bowl pressure lines and try a run. Still didn't work. Same smooth up to 4200/4300 RPM, smooth drop to 3200 RPM, smooth acceleration up to 4300 RPM, drop
Date: 08/03/2012
Views: 10527
|
|
|
DSCN3775
Date: 05/10/2005
Views: 5864
|
|
|
|
IMG_6302
Building a Europa would be extremely dull if everything went right the first time. The engine is delivered without a mounting frame. Call the dealer who tells me most planes use a different mounting so the frame is not delivered as standard. I ordered the
Date: 12/23/2016
Views: 10223
|
|
|
Main_Landing_Gear_07
Date: 07/01/2007
Views: 5121
|
|
|
|
dscn2099
Date: 12/31/1969
Views: 4220
|
|
|
Bud's notes on fitting airbrakes 1.
Date: 09/01/2010
Views: 3227
|
|
|
|
IMG_8682post
Date: 08/10/2009
Views: 6400
|
|
|
Tie-bar 38.
Date: 11/16/2010
Views: 6869
|
|
|
|
Control_Systems_47
Date: 01/23/2006
Views: 3937
|
|
|
IMG_1226ann
Finally got the baffle mounted. Only now I see I need to re-do the safety wiring.
Date: 03/18/2011
Views: 3920
|
|
|
|
Tailplane_16
Date: 01/23/2006
Views: 4066
|
|
|
IMG_7969Ann
Date: 06/29/2008
Views: 5367
|
|
|
|
IMG_3094ann
Date: 01/17/2009
Views: 4288
|
|
|
G-CGNZ001
Date: 05/12/2012
Views: 35337
|
|
