|
|
MG_1698
Date: 07/09/2006
Views: 4010
|
|
|
The_other_one
Date: 09/08/2007
Views: 282604
|
|
|
|
IMG_8008Ann
Date: 07/02/2008
Views: 5825
|
|
|
000_0328_644
Date: 03/07/2005
Views: 7002
|
|
|
|
Fin cap install 1.
Date: 05/07/2009
Views: 7453
|
|
|
24112006023_G
Date: 11/26/2006
Views: 6546
|
|
|
|
IMG_6956 1
With the tank removed, the micro and urethane could be covered with cork. The cork serves to protect the tank from abrasion by the support materials. You can also see the strip of urethane applied to the top of the aluminum support for the tank ledge.
Date: 11/10/2013
Views: 9377
|
|
|
IMG_0832
Date: 11/17/2005
Views: 5347
|
|
|
|
P9010170
Date: 09/09/2007
Views: 5396
|
|
|
CH17_24
Date: 12/31/1969
Views: 7151
|
|
|
|
DSCN8199
Date: 09/18/2010
Views: 5947
|
|
|
RudderMount06Ann
Date: 06/10/2004
Views: 3413
|
|
|
|
monteq4
Date: 08/14/2011
Views: 4394
|
|
|
N4211W wing rigging 21.
Date: 10/09/2010
Views: 5652
|
|
|
|
DSCN3845
Date: 07/01/2005
Views: 4180
|
|
|
IMG_1177
Date: 10/02/2009
Views: 8292
|
|
|
|
Paul's firewall 4.
Date: 02/21/2010
Views: 6348
|
|
|
IMG_7541ann
It took almost an hour to carefully and safely get the tap started in the aluminum brake. I sure didn't want to screw that up. Once I had a good start and the tap began to cut, I clamped the tap in the vice with the brake held high so chips fall out and
Date: 04/18/2010
Views: 4448
|
|
|
|
DSCN3915
Date: 07/24/2005
Views: 7724
|
|
|
wingtipltswiring3
Date: 12/28/2006
Views: 6769
|
|
