|
|
IMG_6161p
2013 05 14 - Flight from Denton Executive to Sulfur Springs Airport and back. Development around the Prosper, TX area.
Date: 05/14/2013
Views: 6028
|
|
|
IMG_1746_001
Date: 07/15/2004
Views: 6386
|
|
|
|
Rotax_914F_1
Date: 01/23/2006
Views: 15399
|
|
|
Fin cap fair 1.
Date: 03/30/2009
Views: 8874
|
|
|
|
24_04_08_vliegfoto_s_032
Date: 04/26/2008
Views: 4202
|
|
|
Front threaded rod cut down to .450 (I aim for minimum of 9.5 threads of engagement on any 5/16-24 joint)
Date: 12/13/2013
Views: 8063
|
|
|
|
IMG_8663post
Date: 08/10/2009
Views: 8485
|
|
|
dsc09047
I took cardboard and bent it around the socket and overlapped per the manual. Then took this cardboard and made a new template for cutouts. This made the layups go really quick.
Date: 01/23/2013
Views: 19921
|
|
|
|
Front HardPoint 4
Date: 12/27/2013
Views: 10804
|
|
|
Starboard and Port Bucket 3 of 4.
Date: 08/06/2003
Views: 16169
|
|
|
|
110602_cowelflap5
Date: 12/31/1969
Views: 4837
|
|
|
Fuel_System_18_001
Date: 09/16/2007
Views: 4802
|
|
|
|
DSC00096
Date: 12/31/1969
Views: 7028
|
|
|
IMG_0942Ann
Date: 07/29/2007
Views: 6288
|
|
|
|
IMG_2601
I took the float bowl off the starboard carb and removed the old gasket. The instructions with the new nitrile gasket said to apply some grease to hold the gasket in place while the bowl was replaced. I didn't have any grease but I had some light oil wh
Date: 05/30/2012
Views: 5117
|
|
|
CH6_7
Date: 12/31/1969
Views: 6966
|
|
|
|
Jos_10
Date: 12/20/2006
Views: 7368
|
|
|
Mid panel insert 7.
Date: 11/17/2010
Views: 8272
|
|
|
|
DSCN5200
Date: 11/29/1999
Views: 6142
|
|
|
dscn0974
Date: 12/31/1999
Views: 4906
|
|
