|
|
Main fuse and switched fuse buses.
Date: 01/21/2003
Views: 11905
|
|
|
ceri_1
Date: 12/31/1969
Views: 6948
|
|
|
|
20_G
Date: 06/19/2009
Views: 5662
|
|
|
IMG_7382ann
The problem... The AN816 provided with the brake does not properly fit the threaded hole in the brake slave cylinder. It will screw in about two threads and that's all. You can see that the 90 degree hose end also sticks up in a big loop just waiting f
Date: 03/07/2010
Views: 5991
|
|
|
|
20050209_IMG_0005
Date: 02/09/2005
Views: 5699
|
|
|
IMG_5246ann
Date: 06/13/2009
Views: 5946
|
|
|
|
IMG_6378Ann
Date: 12/11/2007
Views: 4980
|
|
|
FillingFuselage17Ann
Date: 08/31/2004
Views: 3751
|
|
|
|
Rotax setup for certified 914s.
Date: 03/06/2007
Views: 12206
|
|
|
IMG_8575
More Capitan
Date: 07/08/2014
Views: 7605
|
|
|
|
CH19_13
Date: 12/31/1969
Views: 4464
|
|
|
Main_Landing_Gear_01
Date: 07/01/2007
Views: 5373
|
|
|
|
IMG_0874post
Finally, back underneath to find the old drops on the cross tube and there was the tell-tale residue of evaporated coolant on the intake to the coolant pump (Green arrow). Shut things down. Found the longest screwdriver I had and was able to reach the c
Date: 01/24/2010
Views: 5850
|
|
|
Running and connecting "Fat" wires 2.
Date: 01/05/2011
Views: 7045
|
|
|
|
15112003123056_G
Date: 12/31/1969
Views: 3893
|
|
|
dscn0327
Date: 12/31/1969
Views: 3961
|
|
|
|
DSCN6357
Date: 10/11/2009
Views: 5489
|
|
|
A062403_Two_1
Date: 12/31/1969
Views: 4295
|
|
|
|
Middle fin rib trimmed 5.
Date: 04/27/2009
Views: 5832
|
|
|
IMG_1818
Date: 07/27/2004
Views: 5510
|
|
