|
|
Here just a slight amount of steering is needed.
Date: 10/08/2009
Views: 5846
|
|
|
TennaTip1_Page_3
Date: 03/24/2009
Views: 6057
|
|
|
|
39 Year Dyke Delta build and I thought we were slow!
Date: 07/27/2010
Views: 6907
|
|
|
IMG_0823ann
the other flap bracket.
Date: 01/27/2011
Views: 5504
|
|
|
|
dsc08640
OK not the best shot but here you can see I used the jack to move the rear rib in place under the airframe being careful not to pinch the belly. I then secured the rib in place but using some drywall screws in the 2x6. This way any weight will be transf
Date: 04/15/2012
Views: 24909
|
|
|
Dynon AOA audio pot 2.
Date: 08/04/2010
Views: 19375
|
|
|
|
DoorLatch71Ann
Date: 05/18/2004
Views: 4034
|
|
|
IMG_0041post
But it was enough to allow the LG to retract fully. Ran the gear up and down about a dozen times. Works great.
Date: 07/08/2010
Views: 6701
|
|
|
|
25092002183220_G
Date: 12/31/1969
Views: 4216
|
|
|
IMG_6542Ann
Date: 01/12/2008
Views: 5196
|
|
|
|
Mod70_EX08Ann
Date: 07/05/2005
Views: 5416
|
|
|
DSCN8181
Date: 09/18/2010
Views: 11525
|
|
|
|
Paul's Interior.
Date: 11/29/2010
Views: 6213
|
|
|
IMG_0190post
Date: 09/08/2010
Views: 4617
|
|
|
|
IMG_3327em
Next request was for a compression check. 80/80, 80/80, 80/80, 79/80. No problem there. But while doing this I decided to check the plugs. Cylinder #3 plugs looked different. WHY?
Date: 06/12/2012
Views: 7485
|
|
|
DSCF0013
Date: 01/19/2010
Views: 8544
|
|
|
|
Flap_Motor_Installation_15
Date: 11/27/2007
Views: 5193
|
|
|
IMG_2492
Date: 04/05/2006
Views: 7284
|
|
|
|
FuelSsytemMod01
Date: 09/24/2003
Views: 7416
|
|
|
IMG_1265ann
The prop bolts have been torqued to 10 ft-lbs and safety wired.
Date: 03/28/2011
Views: 4932
|
|
