|
|
IMG_3522ann
Date: 02/18/2009
Views: 6116
|
|
|
IMG_6960 1
One needs some room near the cockpit so the wings come off. In addition, all the connections to the fuel tank were removed.
Date: 11/10/2013
Views: 10502
|
|
|
|
DSCN5250Ann
Date: 12/17/2006
Views: 4722
|
|
|
Rivets
Next problem. Once the push rod end was fitted and drilled according to the manual the rivets provided were too short to go through the whole structure. Awaiting a response from Europa
Date: 09/03/2015
Views: 35052
|
|
|
|
IMG_1385
Date: 01/31/2010
Views: 8278
|
|
|
DSC00261
Date: 12/31/1969
Views: 5777
|
|
|
|
Trying not to mar flap cross tube too bad with Upstops 5 of 7
Date: 12/26/2013
Views: 11305
|
|
|
IMG_7382ann
The problem... The AN816 provided with the brake does not properly fit the threaded hole in the brake slave cylinder. It will screw in about two threads and that's all. You can see that the 90 degree hose end also sticks up in a big loop just waiting f
Date: 03/07/2010
Views: 6188
|
|
|
|
IMG_1282ann
Interior view showing the layup applied.
Date: 03/29/2011
Views: 4798
|
|
|
Plugs07Ann
Date: 06/23/2004
Views: 4844
|
|
|
|
p1000725
p1000725.jpg
Date: 03/12/2012
Views: 13210
|
|
|
Kingsley_Hurst_Door_Stiffening_3
Date: 10/17/2009
Views: 9953
|
|
|
|
DSCF0044
Date: 06/19/2009
Views: 4070
|
|
|
Mill round slot in master cylinder 5 of 12
Date: 12/23/2013
Views: 9505
|
|
|
|
DSCN6709
Date: 10/25/2009
Views: 6591
|
|
|
Making awful fit of lift pads correct 43.
Date: 10/16/2010
Views: 8382
|
|
|
|
dscn0604
Date: 12/31/1969
Views: 4943
|
|
|
109_0974_IMG_2
Date: 01/28/2004
Views: 7220
|
|
|
|
DSCF0033
Date: 08/18/2009
Views: 5442
|
|
|
DSCN5153
Date: 11/29/1999
Views: 5375
|
|
