|
|
IMG_2528
View from the other side. Must have down 5 test fit by the last one. Each resulted in finding things to correct. So I've been correcting things for a couple weeks now. More wire labels, adding connectors, checking pinouts, testing switches, finding is
Date: 01/14/2012
Views: 6187
|
|
|
IMG_3438em
There was a bit more work with the Billet pump package, but it proved not to be the problem. Moving on, OK, not the fuel system. Try running the engine as a normally aspirated engine. Remove the connection between the turbo and airbox. Believe it or
Date: 07/17/2012
Views: 10088
|
|
|
|
DoorSupportMod49Ann
Date: 02/19/2006
Views: 4071
|
|
|
Port_fresh_air_vent_Y9_06_07
Date: 06/07/2009
Views: 4703
|
|
|
|
Aluminum Plenum flanges installed
Aluminum flanges were added to the plenums so that the plenums would not need to be fastened directly to the hot heads. Later in the build, the pop rivets were replaced with machine screws so that the front 2/3 of the plenum could be easily removed
Date: 01/01/2011
Views: 193375
|
|
|
Wing incidence glider.
Date: 10/20/2010
Views: 4877
|
|
|
|
DSCN5419Ann
Date: 12/29/2006
Views: 5180
|
|
|
LGSupportChnl05
Date: 02/10/2004
Views: 4199
|
|
|
|
Lower door anti-bulge 13.
Date: 12/01/2009
Views: 5767
|
|
|
DSCN5665Ann
Date: 04/02/2007
Views: 5092
|
|
|
|
IMG_6347Ann
Date: 12/01/2007
Views: 5903
|
|
|
Art removed gelcoat from windscreen rebate.
Date: 06/26/2009
Views: 9445
|
|
|
|
IMG_6976
At this point all that's left is that portion of the tank which was bonded to the back of the back rest.
Date: 10/19/2013
Views: 9740
|
|
|
Condition Inspection 3 of 3 Bob Borger
Date: 02/04/2010
Views: 6618
|
|
|
|
IMG_0230
Date: 01/31/2014
Views: 53950
|
|
|
IMG_2090
Date: 12/01/2004
Views: 8149
|
|
|
|
Paul's conduit 4.
Date: 07/27/2010
Views: 5401
|
|
|
081402_rigged
Date: 12/31/1969
Views: 4254
|
|
|
|
nex_2014_01_12_07
Port side.
Date: 01/13/2014
Views: 18074
|
|
|
Larger screw, vise grip kluge and persuader did trick.
Date: 01/25/2010
Views: 7797
|
|
