|
|
3 to 4 quarts of air trapped in tank of Monowheel unless you burp.
Date: 07/31/2011
Views: 3398
|
|
|
CPC (Circular Plastic Connector).
Date: 02/21/2011
Views: 4286
|
|
|
|
imm031_32
Date: 09/02/2009
Views: 5590
|
|
|
DSC00531
Date: 12/31/1969
Views: 5819
|
|
|
|
IMG_1275ann
2011 03 29 Weather has turned cold again. No hanger work for a few days. Working in the shop on the wheel pants. The nose gear pant with mounting flange for the front piece
Date: 03/29/2011
Views: 4761
|
|
|
IMG_0270post
Date: 09/17/2010
Views: 6963
|
|
|
|
22112003200413_G
Date: 12/31/1969
Views: 4476
|
|
|
SA_006_dwg
Date: 10/02/2008
Views: 6561
|
|
|
|
110_1030_IMG
Date: 02/19/2004
Views: 7645
|
|
|
IMG_1140
Date: 08/30/2007
Views: 5290
|
|
|
|
Sternpost08Ann
Date: 06/14/2004
Views: 3927
|
|
|
DSCN5552Ann
Date: 02/18/2007
Views: 4857
|
|
|
|
Floor relay 1.
Date: 06/16/2010
Views: 8488
|
|
|
DSCN8324
Date: 09/18/2010
Views: 6332
|
|
|
|
WingSet65Ann
Date: 07/29/2004
Views: 4424
|
|
|
Aluminum Plenum flanges installed
Aluminum flanges were added to the plenums so that the plenums would not need to be fastened directly to the hot heads. Later in the build, the pop rivets were replaced with machine screws so that the front 2/3 of the plenum could be easily removed
Date: 01/01/2011
Views: 193395
|
|
|
|
climbers on Mt Blanc
Looking down on Mt Blanc from 18000 ft
Date: 08/17/2012
Views: 12708
|
|
|
Ready to install nut-plates
Date: 11/27/2013
Views: 9942
|
|
|
|
DSCN6333
Date: 10/11/2009
Views: 4855
|
|
|
dsc08605
When I received the plane it had a few areas of this green tape. I guess it was going to be used as a release agent for some sort of jig fabrication. I have found that this 3M stuff works very well.
Date: 04/10/2012
Views: 33516
|
|
