|
|
FWF-10 (9)
Date: 11/29/2009
Views: 7660
|
|
|
IMG_2249Ann
Date: 10/05/2008
Views: 5277
|
|
|
|
IMG_7541ann
It took almost an hour to carefully and safely get the tap started in the aluminum brake. I sure didn't want to screw that up. Once I had a good start and the tap began to cut, I clamped the tap in the vice with the brake held high so chips fall out and
Date: 04/18/2010
Views: 4166
|
|
|
IMG_1201
Date: 10/28/2009
Views: 5276
|
|
|
|
tailwheel_cabling_3
Date: 04/21/2009
Views: 5192
|
|
|
IMG_6858
The old fittings as removed from the old tank. Vent on left, starboard outlet in the middle and port outlet on the right.
Date: 10/01/2013
Views: 7984
|
|
|
|
IM002771
Date: 10/30/2007
Views: 6937
|
|
|
Vertex_ant_11
Date: 03/15/2009
Views: 5967
|
|
|
|
Mill round slot in master cylinder 10 of 12
Date: 12/23/2013
Views: 5775
|
|
|
DSC_0081
Date: 06/24/2007
Views: 4327
|
|
|
|
Right_Plenum_installed
Right Plenum, both portions installed
Date: 07/09/2012
Views: 128078
|
|
|
New MC-4A 08
With the mounting holes drilled and the sides cut away the brackets are attached to the mount.
Date: 04/15/2012
Views: 3898
|
|
|
|
Landing_Gear_08
Date: 01/23/2006
Views: 5379
|
|
|
IMG_0130post
Date: 09/03/2010
Views: 3496
|
|
|
|
LGFame01
Date: 02/11/2004
Views: 4430
|
|
|
DSCN5060Ann
Date: 12/13/2006
Views: 4035
|
|
|
|
DSCF0035
Date: 10/24/2010
Views: 4925
|
|
|
IMG_0055
Date: 03/03/2007
Views: 5623
|
|
|
|
IMG_0004post
Date: 08/30/2010
Views: 7217
|
|
|
Wiring11Ann
Date: 12/31/1969
Views: 4020
|
|
