|
|
IMG_0294post
Date: 09/18/2010
Views: 6065
|
|
|
Prestwick_Scotland
Date: 05/03/2009
Views: 4894
|
|
|
|
DSCN6204Ann
Date: 07/04/2007
Views: 4691
|
|
|
DSCN6443
Date: 10/25/2009
Views: 3555
|
|
|
|
IMG_1431ann
Continuing work on the fill/sand
Date: 12/21/2010
Views: 4648
|
|
|
TrimRelayDeck06small
Date: 04/13/2005
Views: 4315
|
|
|
|
IMG_1086ann
Back in early April I attempted to bolt the new Billet Pump onto the gearbox. Problem #1 - It didn't fit the boss on the gearbox. It hit a raised area at the edge of the boss.
Date: 04/03/2010
Views: 4960
|
|
|
IMG_6978
The crack as viewed from the top side.
Date: 10/19/2013
Views: 6767
|
|
|
|
Web_Site_24
Date: 03/25/2004
Views: 5426
|
|
|
Sternpost12Ann
Date: 06/28/2004
Views: 3849
|
|
|
|
IMG_0694
Date: 10/29/2005
Views: 4656
|
|
|
FWF-10 (4)
Date: 11/28/2009
Views: 7300
|
|
|
|
Flettner strip
Date: 01/26/2010
Views: 7687
|
|
|
dscn1767
Date: 12/31/1969
Views: 4684
|
|
|
|
DSC00228
Had to remove more of the rudder than I wanted so build up rudder trailing edge by attaching peel ply to the outside of the rudder and build up trailing edge using flox around the edge and an initial 2 ply of bid. i'll apply an additional 2 ply after the
Date: 09/10/2015
Views: 65324
|
|
|
IMG_8857post
Date: 08/10/2009
Views: 4241
|
|
|
|
108_0897_IMG
Date: 12/07/2003
Views: 5995
|
|
|
DSCF0016_001
Date: 08/18/2009
Views: 3856
|
|
|
|
DSCN5117
Date: 11/29/1999
Views: 6973
|
|
|
070202_Weights
Date: 12/31/1969
Views: 4072
|
|
