|
|
CH23_6
Date: 05/07/2005
Views: 6625
|
|
|
G-10 cover broke loose 2.
Date: 11/23/2009
Views: 5759
|
|
|
|
Starboard wing 40.
Date: 06/20/2009
Views: 5755
|
|
|
StarboardWingRootPlys02
Date: 12/28/2003
Views: 6065
|
|
|
|
IMG_2228
Date: 05/27/2016
Views: 27983
|
|
|
A012203_Panel
Date: 12/31/1969
Views: 4506
|
|
|
|
IMG_5722ann
Date: 07/25/2009
Views: 5360
|
|
|
IMG_6687Ann
Date: 02/15/2008
Views: 6862
|
|
|
|
FWF-10 (21)
Date: 04/17/2010
Views: 26375
|
|
|
ThrottlePlate00
Date: 04/02/2004
Views: 6843
|
|
|
|
Third access cover 3.
Date: 05/02/2009
Views: 7888
|
|
|
IMG_1285ann
The tracing for the cover cut out.
Date: 03/30/2011
Views: 3989
|
|
|
|
InstrumentPanel22Ann
Date: 05/26/2004
Views: 3147
|
|
|
Control_Systems_57
Date: 01/23/2006
Views: 3342
|
|
|
|
Oil_Pan_input
I put two 1.25 inch holes on either side of the shark's tooth. They empty into a rectangular plenum about 4 X 2.5 that is terminated about 1/4 inch in front of the oil pan. The pan has cooling strips and the outside air contributes to oil cooling.
Date: 08/31/2011
Views: 239725
|
|
|
IMG_6715Ann
Date: 02/17/2008
Views: 3824
|
|
|
|
DSC00228
Had to remove more of the rudder than I wanted so build up rudder trailing edge by attaching peel ply to the outside of the rudder and build up trailing edge using flox around the edge and an initial 2 ply of bid. i'll apply an additional 2 ply after the
Date: 09/10/2015
Views: 68850
|
|
|
WingSet84Ann
Date: 08/02/2004
Views: 4360
|
|
|
|
IM002755
Date: 10/30/2007
Views: 8143
|
|
|
23062003165015_G
Date: 12/31/1969
Views: 4602
|
|
