|
|
IMG_7233
2-ply fiberglass strips were made up to be bonded to the inside of the unit. These strips went on all 4 sides. Here the strip is being bonded to the aft wall.
Date: 01/26/2014
Views: 11015
|
|
|
IMG_1371ann
2010 11 17 Had some leftover SuperFil from wing work so I cleaned up the holes in the tail where the old tailwheel cables exited the aft fuselage and proceeded to fill them.
Date: 11/17/2010
Views: 6380
|
|
|
|
DSC00157
Instructions state that rod should be reamed to 0.375" but it needed to be reamed out 0.428" to fit push rod.
Date: 09/03/2015
Views: 67911
|
|
|
Main_Landing_Gear_09
Date: 07/01/2007
Views: 4833
|
|
|
|
Firewallx0Ann
Date: 04/23/2006
Views: 4372
|
|
|
090502_OilCooler3
Date: 12/31/1969
Views: 4660
|
|
|
|
IMG_8850post
Date: 08/10/2009
Views: 5485
|
|
|
IMG_0045
Date: 08/30/2006
Views: 5603
|
|
|
|
Aileron_issue_4
Date: 11/29/1999
Views: 4301
|
|
|
DSCN8278
Date: 09/18/2010
Views: 7010
|
|
|
|
P9010174_Short_Final_Baby_Blue
Date: 09/01/2007
Views: 6636
|
|
|
p1000633
p1000633.jpg
Date: 02/14/2012
Views: 11715
|
|
|
|
FWF-10 (12)
Date: 03/06/2010
Views: 14250
|
|
|
dscn1094
Date: 12/31/1969
Views: 3805
|
|
|
|
DSCF0014
Date: 12/06/2009
Views: 8012
|
|
|
24_04_08_vliegfoto_s_060
Date: 04/26/2008
Views: 3623
|
|
|
|
CH2_1
Date: 12/31/1969
Views: 6600
|
|
|
IMG_1055
Date: 08/09/2007
Views: 5249
|
|
|
|
Harrison_Tailplane_Bracket_Mod_11
Date: 05/19/2008
Views: 5309
|
|
|
dscn0992
Date: 12/31/1969
Views: 4249
|
|
