|
|
DSCN5582Ann
Date: 02/25/2007
Views: 4499
|
|
|
042702_sparcup
Date: 12/31/1969
Views: 3839
|
|
|
|
Rudddder_2_001
Date: 05/23/2009
Views: 7796
|
|
|
IMG_0251
Date: 02/12/2006
Views: 5993
|
|
|
|
Took a night to make 2 holes.
Date: 10/08/2009
Views: 5943
|
|
|
DSCN5039Ann
Date: 12/12/2006
Views: 4614
|
|
|
|
dscn2829
Date: 12/31/1969
Views: 9164
|
|
|
IMGA0701
First wings L.E layed up and peel plyed. The blue foam is keeping in place a 90 degree strip which is keeping the end of the uni cloth bent under to aid bonding to the rear of the spar. A helpful tip from Mike Gregory.......Oh wanted to say it took 8 and
Date: 04/20/2013
Views: 112163
|
|
|
|
dscn0280
Date: 12/31/1969
Views: 4137
|
|
|
Fin cap 16.
Date: 03/21/2009
Views: 10976
|
|
|
|
Starboard wing 14.
Date: 06/13/2009
Views: 6118
|
|
|
DSCN6039
Date: 10/11/2009
Views: 15168
|
|
|
|
IMG_5683Ann
Date: 10/05/2007
Views: 6433
|
|
|
Aluminum Plenum flanges installed
Aluminum flanges were added to the plenums so that the plenums would not need to be fastened directly to the hot heads. Later in the build, the pop rivets were replaced with machine screws so that the front 2/3 of the plenum could be easily removed
Date: 01/01/2011
Views: 193368
|
|
|
|
IMG_5308
Date: 03/17/2013
Views: 8004
|
|
|
Compton_Abbas_EGHA
Date: 07/25/2009
Views: 5767
|
|
|
|
DSCF0071
Date: 04/02/2009
Views: 4568
|
|
|
IMG_2202
Date: 01/16/2005
Views: 4820
|
|
|
|
IMG_0040
Date: 08/30/2006
Views: 5567
|
|
|
dscn2764
Date: 12/31/1969
Views: 4016
|
|
