|
|
IMG_0915post
I stuffed the brake line back into the aircraft, tied it all down and screwed it to the swing arm. Bolted the new caliper to the brake disk and torqued it to 90 in-lbs.
Date: 07/01/2010
Views: 4161
|
|
|
FWF-10 (5)
Date: 11/28/2009
Views: 10095
|
|
|
|
IMG_3241ann
Date: 02/02/2009
Views: 4947
|
|
|
31_1Cutting_table
Date: 12/31/1999
Views: 3792
|
|
|
|
DSCF0018_003
Date: 09/08/2009
Views: 5206
|
|
|
IMG_8013Ann
Date: 07/05/2008
Views: 5111
|
|
|
|
DSCN5284_copy
Date: 12/19/2006
Views: 3840
|
|
|
NACAInside
Date: 11/04/2004
Views: 5351
|
|
|
|
IMG_6792post
Width and thickness of the tail wheel "U" channel
Date: 12/10/2009
Views: 4945
|
|
|
dscn0796
Date: 12/31/1969
Views: 3884
|
|
|
|
IMG_0424
Date: 09/24/2005
Views: 5537
|
|
|
IMG_2303
Date: 04/07/2005
Views: 6387
|
|
|
|
Wing_Profiles Kingsley 10
Date: 07/25/2008
Views: 6162
|
|
|
DSCN8220
Date: 09/18/2010
Views: 8909
|
|
|
|
Troys holder 3
Date: 02/24/2010
Views: 6967
|
|
|
Mod73_06
Date: 11/29/1999
Views: 6069
|
|
|
|
IMGA0605
Date: 06/25/2014
Views: 87687
|
|
|
img0362_copy
Date: 08/01/2007
Views: 4577
|
|
|
|
New MC-4A 10
The aft holes have been drilled and the MC-4A's are bolted in place to check the fit.
Date: 04/15/2012
Views: 4242
|
|
|
Flap drive pin install 15.
Date: 12/07/2010
Views: 7366
|
|
