|
|
081602_door_handles3
Date: 12/31/1969
Views: 4307
|
|
|
IMG_1953
Date: 11/04/2004
Views: 4074
|
|
|
|
DSCN3913
Date: 09/30/2005
Views: 4372
|
|
|
IMG_2340
Date: 07/13/2005
Views: 4925
|
|
|
|
IMG_3384em
Remove the Billet pump from the circuit. Run with only electric pump. Input line connected directly to the regulator. At the same time, remove airbox pressure from differential gauge to get absolute fuel pressure out of regulator.
Date: 07/09/2012
Views: 5896
|
|
|
dscn1064
Date: 12/31/1969
Views: 3385
|
|
|
|
11102003212239_G
Date: 12/31/1969
Views: 3536
|
|
|
IMG_0764
Date: 11/11/2005
Views: 6194
|
|
|
|
dscn1790
Date: 12/31/1969
Views: 4174
|
|
|
Outriggers 1.
Date: 10/31/2007
Views: 25990
|
|
|
|
Flap drive pin install 7.
Date: 11/30/2010
Views: 7643
|
|
|
IMG_1238ann
The vent port was reversed from the original regulator. This one points forward. Had to do some tugging on tubing to get it all arranged. As soon as I have my new brake caliper installed and tested, I'll be ready to start testing the engine.
Date: 06/21/2010
Views: 4481
|
|
|
|
SurfaceFinish04
Date: 05/16/2003
Views: 5487
|
|
|
FlapDrive21Ann
Date: 08/15/2004
Views: 3897
|
|
|
|
IMG_7558post
I located a couple AN-6 adaptors to replace the hose barbs on the regulator. The adaptors are from Earl's (anplumbing.com), part #AT985006ERL for the black one and 995006ERL for the blue one. They are called AN "O" Ring Port Adaptors, AN-6 to
Date: 04/30/2010
Views: 5060
|
|
|
Jackstandx4Ann
Date: 04/09/2006
Views: 5134
|
|
|
|
DSCF0083
Date: 02/14/2009
Views: 3908
|
|
|
P1030534
Date: 09/12/2009
Views: 7123
|
|
|
|
CH25_05
Date: 06/27/2006
Views: 4926
|
|
|
IMG_2222Ann
Date: 09/26/2008
Views: 4513
|
|
