|
|
DSCF0012
Date: 12/06/2009
Views: 15476
|
|
|
IM003281
Date: 10/28/2007
Views: 11168
|
|
|
|
IM002712
Date: 10/30/2007
Views: 7892
|
|
|
IMG_2565
You can see the bubbles of air coming from the brake line as you push fluid in from below. You can also manipulate the brake master to assist the flow of air out of the system.
Date: 03/12/2012
Views: 8993
|
|
|
|
3M Flowable Finishing Putty 3.
Date: 08/23/2009
Views: 7332
|
|
|
110_1077_IMG
Date: 03/08/2004
Views: 7296
|
|
|
|
Composite rivets 3.
Date: 09/08/2009
Views: 5656
|
|
|
img0314copy
Date: 07/29/2007
Views: 3750
|
|
|
|
DoorLatch22Ann
Date: 05/07/2004
Views: 3317
|
|
|
IMG_3327em
Next request was for a compression check. 80/80, 80/80, 80/80, 79/80. No problem there. But while doing this I decided to check the plugs. Cylinder #3 plugs looked different. WHY?
Date: 06/12/2012
Views: 7243
|
|
|
|
IMG_2571
Opened all the inspection holes to ensure all is well inside.
Date: 02/24/2012
Views: 6465
|
|
|
dsc08613
Unused Mono wheel components. I'll probably be selling these soon.
Date: 04/10/2012
Views: 31990
|
|
|
|
IMG_7382ann
The problem... The AN816 provided with the brake does not properly fit the threaded hole in the brake slave cylinder. It will screw in about two threads and that's all. You can see that the 90 degree hose end also sticks up in a big loop just waiting f
Date: 03/07/2010
Views: 6019
|
|
|
109_0955_IMG
Date: 01/18/2004
Views: 6630
|
|
|
|
Fin rib 7.
Date: 04/22/2009
Views: 6423
|
|
|
IMG_3097Ann
Date: 01/17/2009
Views: 6219
|
|
|
|
DSCN6239
Date: 10/11/2009
Views: 5249
|
|
|
Label panel 1
Date: 06/12/2010
Views: 3519
|
|
|
|
TrimRelayDeck00Ann
Date: 09/09/2004
Views: 3438
|
|
|
Sttrob_7
Date: 06/02/2009
Views: 12314
|
|
