|
|
DSCN5311Ann
Date: 12/21/2006
Views: 3997
|
|
|
IMG_0242post
Date: 09/12/2010
Views: 3607
|
|
|
|
Aluminum Plenum flanges installed
Aluminum flanges were added to the plenums so that the plenums would not need to be fastened directly to the hot heads. Later in the build, the pop rivets were replaced with machine screws so that the front 2/3 of the plenum could be easily removed
Date: 01/01/2011
Views: 170971
|
|
|
Door hinge rebates 13.
Date: 11/03/2009
Views: 5442
|
|
|
|
IMG_2396
Date: 09/12/2005
Views: 5638
|
|
|
DSCN3924
Date: 09/30/2005
Views: 4579
|
|
|
|
dscn0674
Date: 12/31/1969
Views: 4780
|
|
|
Newest version Main Schematic Y10-06-11.
Date: 06/08/2010
Views: 11357
|
|
|
|
Spar clamp that allows a little fore and aft movement
Date: 11/27/2013
Views: 8845
|
|
|
IMG_5615
Date: 10/28/2013
Views: 11291
|
|
|
|
IMG_0014
Date: 04/13/2007
Views: 5023
|
|
|
Turnbuckle / cable tangle 2.
Date: 05/31/2009
Views: 6188
|
|
|
|
DSCF0043
Date: 06/19/2009
Views: 4394
|
|
|
imm034_35
Date: 09/02/2009
Views: 5159
|
|
|
|
Tailplane_59
Date: 01/23/2006
Views: 3709
|
|
|
CBM - 31 - FIREWALL
Date: 11/18/2013
Views: 4431
|
|
|
|
InstrumentPanel28Ann
Date: 05/26/2004
Views: 3220
|
|
|
IMG_2212Ann
Date: 09/19/2008
Views: 4516
|
|
|
|
The center hole was tapped and used for 1st test mount, a big lightening hole will eliminate it
Date: 11/27/2013
Views: 8039
|
|
|
IMG_1285ann
The tracing for the cover cut out.
Date: 03/30/2011
Views: 3823
|
|
