|
|
Now you can see lightening holes onthe small offsetting plate
Date: 11/28/2013
Views: 8122
|
|
|
IMG_7541ann
It took almost an hour to carefully and safely get the tap started in the aluminum brake. I sure didn't want to screw that up. Once I had a good start and the tap began to cut, I clamped the tap in the vice with the brake held high so chips fall out and
Date: 04/18/2010
Views: 4720
|
|
|
|
Aft sill cover 32.
Date: 09/05/2010
Views: 9623
|
|
|
IMG_2603
I replaced the float bowl, torqued the "nut" to 48.7 ft-lbs and safety wired it as per Rotax specs.
Date: 05/30/2012
Views: 5805
|
|
|
|
Strobe_noise_5
Date: 02/20/2009
Views: 6608
|
|
|
Time to make a fuel gauge sender cover 8.
Date: 03/18/2009
Views: 7129
|
|
|
|
DSCN5456Ann
Date: 01/05/2007
Views: 5574
|
|
|
DSCF0017
Date: 06/19/2009
Views: 4585
|
|
|
|
dscn0879
Date: 12/31/1969
Views: 3720
|
|
|
IMG_0233post
Date: 09/11/2010
Views: 5028
|
|
|
|
Mod60_10
Date: 09/10/2006
Views: 6199
|
|
|
Tailplane_49
Date: 01/23/2006
Views: 3948
|
|
|
|
DSCN6259
Date: 10/11/2009
Views: 5423
|
|
|
IMG_0117
Date: 01/05/2007
Views: 9008
|
|
|
|
MG_2914
Date: 03/17/2008
Views: 4936
|
|
|
dscn0043
Date: 12/31/1969
Views: 5072
|
|
|
|
DSC02425
Date: 04/13/2010
Views: 7320
|
|
|
Starboard wing 50.
Date: 06/19/2009
Views: 5114
|
|
|
|
Door sill conduit run 22.
Date: 08/14/2010
Views: 7387
|
|
|
Oil_Cooling_Manifold_Switch_Check_Valve
Date: 12/31/1969
Views: 6090
|
|
