|
|
Bild_008_1
Date: 08/22/2008
Views: 6410
|
|
|
InstrumentPanel59Ann
Date: 09/22/2004
Views: 4261
|
|
|
|
dsc09022
Here you see I used bondo on the shims and screwed them down into the block. The shims made sure the guide was level. Also note the hole drilled in the Aluminum angle and the shim. This is where I fixed the guide for the curing stage to ensure nothing
Date: 01/22/2013
Views: 21273
|
|
|
DSCN4982Ann
Date: 12/04/2006
Views: 3944
|
|
|
|
DSCF0087
Date: 10/26/2009
Views: 17620
|
|
|
DSCN5612Ann
Date: 03/11/2007
Views: 4376
|
|
|
|
DSCF0070
Date: 10/27/2009
Views: 7181
|
|
|
DSCN3854
Date: 07/01/2005
Views: 4580
|
|
|
|
Paul cradle 1
Date: 02/21/2010
Views: 5824
|
|
|
DSCN5606Ann
Date: 03/11/2007
Views: 4943
|
|
|
|
Headrest_2_001
Date: 03/05/2009
Views: 7039
|
|
|
imm027_28
Date: 09/02/2009
Views: 5567
|
|
|
|
DSCN5119
Date: 11/29/1999
Views: 8401
|
|
|
061602_Panel_layups
Date: 12/31/1969
Views: 3758
|
|
|
|
Dover_Cliffs
Date: 09/26/2009
Views: 4930
|
|
|
IMG_0846post
So I closed the hanger and went over to Northwest Regional to help Gary put the metal on his Toot.
Date: 01/22/2010
Views: 5416
|
|
|
|
DSCF0688
Date: 08/02/2003
Views: 6429
|
|
|
DSCN4981Ann
Date: 12/04/2006
Views: 4339
|
|
|
|
DoorMount43Ann
Date: 07/09/2004
Views: 4917
|
|
|
110_1056_IMG
Date: 03/04/2004
Views: 6565
|
|
