|
N531RP_2_Y9_06_07
Date: 06/07/2009
Views: 2742
|
|
|
DSCF0642
Date: 07/29/2003
Views: 4270
|
|
|
IMG_8751post
Date: 08/10/2009
Views: 3677
|
|
|
IMG_3218
Once the brakes seemed to be OK it was time to run the engine and check it out. That didn't go well. Started well, warmed up with a bit of choke at the beginning. Smoothed out nicely and idled properly after it was all warmed up. Then I added throttle
Date: 05/18/2012
Views: 4481
|
|
|
IM003466
Date: 10/31/2007
Views: 2674
|
|
|
A4
Date: 01/27/2009
Views: 2998
|
|
|
Magnetic oil plug check and 5 year rubber part replacement 3
Date: 08/19/2010
Views: 1908
|
|
|
Tailplane_66
Date: 01/23/2006
Views: 2083
|
|
|
dscn2168
Date: 12/31/1969
Views: 2403
|
|
|
DSCF0695
Date: 08/02/2003
Views: 3267
|
|
|
DSC00885
Date: 04/15/2005
Views: 3032
|
|
|
IMG_3577post
Next test, connect high pressure port from airbox directly to the "T" into the carb float bowl pressure lines and try a run. Still didn't work. Same smooth up to 4200/4300 RPM, smooth drop to 3200 RPM, smooth acceleration up to 4300 RPM, drop
Date: 08/03/2012
Views: 7669
|
|
|
DSCN5026Ann
Date: 12/10/2006
Views: 2639
|
|
|
Example of slightly over center - good.
Date: 06/12/2011
Views: 3169
|
|
|
IMG_0034post
Date: 09/01/2010
Views: 3464
|
|
|
052102_BID_tunnel
Date: 12/31/1969
Views: 2527
|
|
|
Fit baggage bay bulkhead - floor before fitting fairings Frans
Date: 12/08/2010
Views: 2326
|
|
|
101502_coelingfas
Date: 12/31/1969
Views: 2986
|
|
|
Steve_D_fuse
Date: 02/21/2004
Views: 4378
|
|
|
IMG_0279
Insulation going in
Date: 04/02/2014
Views: 10132
|
|