|
|
5/16" fuel line.
Date: 11/01/2007
Views: 8435
|
|
|
Control_Systems_10
Date: 01/23/2006
Views: 3946
|
|
|
|
fuel_2
Date: 12/31/1969
Views: 6358
|
|
|
FlapDrive14Ann
Date: 08/11/2004
Views: 3074
|
|
|
|
DSCN4804Ann
Date: 10/29/2006
Views: 4872
|
|
|
DSCF0607
Date: 07/25/2003
Views: 6951
|
|
|
|
dscn0374
Date: 12/31/1969
Views: 4068
|
|
|
CH8P_11
Date: 12/31/1969
Views: 5480
|
|
|
|
Ant_5
Date: 02/17/2009
Views: 5692
|
|
|
Making awful fit of lift pads correct 35.
Date: 10/15/2010
Views: 5608
|
|
|
|
img0905copy
Date: 07/29/2007
Views: 3477
|
|
|
Aluminum Plenum flanges installed
Aluminum flanges were added to the plenums so that the plenums would not need to be fastened directly to the hot heads. Later in the build, the pop rivets were replaced with machine screws so that the front 2/3 of the plenum could be easily removed
Date: 01/01/2011
Views: 171572
|
|
|
|
DSCF0639
Date: 07/29/2003
Views: 9280
|
|
|
IMG_7429post
Here's a closeup of the hose end, bolt and washers. The hose end connector is identical to that which was on the master cylinder end so this should easily replace the 90 degree AN hose end provided. We'll know better later this week when I can get to th
Date: 03/15/2010
Views: 4422
|
|
|
|
IMG_6379Ann
Date: 12/11/2007
Views: 4675
|
|
|
010323_006
Date: 12/31/1969
Views: 4665
|
|
|
|
109_0997_IMG
Date: 02/08/2004
Views: 5740
|
|
|
122_2231_IMG
Date: 01/27/2005
Views: 6224
|
|
|
|
IMG_2517
This is 160 Kts on the manometer (right on)
Date: 02/28/2012
Views: 5474
|
|
|
DSCN8248
Date: 09/18/2010
Views: 6783
|
|
