|
|
DSCF0041
Date: 08/18/2009
Views: 4422
|
|
|
Sternpost trim 4.
Date: 04/26/2009
Views: 6286
|
|
|
|
DSCN3130
Date: 09/12/2009
Views: 9229
|
|
|
IMG_0080post
Date: 09/02/2010
Views: 4172
|
|
|
|
IMG_0040
Date: 03/16/2007
Views: 7430
|
|
|
OpenBox
Date: 01/23/2006
Views: 8060
|
|
|
|
Archer_Dan_2
Date: 01/26/2009
Views: 5569
|
|
|
LGMod5100
Date: 02/03/2004
Views: 4270
|
|
|
|
IMG_5916Ann
Date: 11/12/2007
Views: 5081
|
|
|
IMG_3214
Then I removed all the cheep crap connectors (with folded sheet metal pins) provided with the gage package, re-ran all the wiring and replaced the cheep connectors with good, 9-pin, sub-D connectors.
Date: 05/17/2012
Views: 6128
|
|
|
|
IMG_1121
Date: 08/30/2007
Views: 4610
|
|
|
Landing_Gear_03
Date: 01/23/2006
Views: 6758
|
|
|
|
CH17_36
Date: 12/31/1969
Views: 5621
|
|
|
Classic Fuselage & Fin Manual Ian.
Date: 09/02/2010
Views: 4748
|
|
|
|
IMG_7014
Next catch was where the filler needed to go into its' position. There was a piece blocking which had to be removed.
Date: 10/23/2013
Views: 11273
|
|
|
P1030530
Date: 09/12/2009
Views: 7826
|
|
|
|
CH9P_12
Date: 12/31/1969
Views: 8857
|
|
|
IMG_7383ann
The Issue, Continued... The blue Tee connector shown has a 3/8 NPT thread on the upper leg. it is a 3/8 x 24 National Pipe Thread. That is, it has a tapered thread. The thread measures 0.373 in on the narrow end and 0.408 in on the wide end. The othe
Date: 03/07/2010
Views: 4203
|
|
|
|
IMG_1207
Date: 11/07/2009
Views: 7366
|
|
|
Outriggers 1.
Date: 10/31/2007
Views: 30999
|
|
