|
|
Bob 2
Date: 06/09/2006
Views: 6244
|
|
|
WingSetC01Ann
Date: 08/07/2004
Views: 3590
|
|
|
|
DSCN6050
Date: 06/08/2007
Views: 6604
|
|
|
DSCF0621
Date: 07/25/2003
Views: 8406
|
|
|
|
Cobra_head_front
Front view of cobra head modification. A vane was added to help smooth flow of air into the carb. The vane runs the length of the cobra head and extends about 1 inch into the carburetor throat. It seems to have helped even out the CHTs and EGSs between
Date: 11/05/2011
Views: 156128
|
|
|
IMG_9561ann
Overview. Flip the fuel pressure regulator, add firesleeve and put in the AN6-6 nipple to connect the input hose to the input fuel flow meter and the installation will be complete. Maybe later this week when all the bits for the brake and fuel line come
Date: 06/06/2010
Views: 5412
|
|
|
|
2005_DSCF0104_2_1
Date: 02/04/2009
Views: 4140
|
|
|
IMG_2451
Templates were used to transfer the instrument locations to the aluminum panels for cutting.
Date: 10/24/2011
Views: 6727
|
|
|
|
IMG_0869
Started the engine and let it run a bit and settle down. Started looking for signs of a leak. Took a bit, but finally found some coolant drops.
Date: 01/24/2010
Views: 3858
|
|
|
N9855S
Date: 10/08/2004
Views: 4902
|
|
|
|
IMG_2703
2012 04 11 - Bits arrived today. Relocated (lower) the holes for the bolt which will hold the aft ends of the master cylinders. Also removed more metal from the brackets.
Date: 04/11/2012
Views: 5531
|
|
|
Door hinge rebates 3.
Date: 11/02/2009
Views: 4714
|
|
|
|
7_nation_trip_21st_August_2004_Prague
Date: 08/17/2004
Views: 7137
|
|
|
DSC02243_Texted
Date: 12/31/1969
Views: 4642
|
|
|
|
IMG_8175Ann
Date: 07/18/2008
Views: 4440
|
|
|
Pep_boys_10
Date: 02/20/2009
Views: 6967
|
|
|
|
IMG_1129
Date: 08/30/2007
Views: 4442
|
|
|
Europa_094
Date: 10/28/2007
Views: 9077
|
|
|
|
Roof_Flap_below
Date: 12/31/1969
Views: 7834
|
|
|
dsc09022
Here you see I used bondo on the shims and screwed them down into the block. The shims made sure the guide was level. Also note the hole drilled in the Aluminum angle and the shim. This is where I fixed the guide for the curing stage to ensure nothing
Date: 01/22/2013
Views: 21181
|
|
