|
|
IMG_1471p
Removed the backing paper and carefully pressed the new X down. Then VERY carefully pulled the release paper off the front, ensuring the X was fully adhered.
Date: 06/07/2011
Views: 4805
|
|
|
TrimRelayDeck03Ann
Date: 09/10/2004
Views: 3259
|
|
|
|
FuelPumps05
Date: 04/15/2004
Views: 4037
|
|
|
DSC01746_Texted
Date: 12/31/1969
Views: 3761
|
|
|
|
ThrottleHousingII02
Date: 03/01/2004
Views: 4325
|
|
|
DSCN5513Ann
Date: 02/04/2007
Views: 5091
|
|
|
|
dsc08642
From the start the airframe was sitting 2.5 deg tail low and 0.1 deg to port. Not bad for just putting her on there. I jacked up the back of the trailer to get it as near to 0.0 as possible and also shifted the airframe latterly to turn that .1 to 0.0 a
Date: 04/15/2012
Views: 27547
|
|
|
Sternpost port side trimmed before install 4.
Date: 11/06/2009
Views: 7462
|
|
|
|
DoorSupportMod49Ann
Date: 02/19/2006
Views: 3859
|
|
|
MassBalanceStruct17
Date: 02/12/2004
Views: 4101
|
|
|
|
IMG_2356
Date: 08/03/2005
Views: 4763
|
|
|
DSCN4710Ann
Date: 09/03/2006
Views: 5250
|
|
|
|
CH8P_25
Date: 12/31/1969
Views: 5649
|
|
|
Emergency Maneuver that starts with Heim? 11 of 13
Date: 12/16/2013
Views: 8739
|
|
|
|
DSC_0234
Date: 05/15/2008
Views: 5005
|
|
|
IMG_1254ann
Removed one electric pump and the associated plumbing to greatly simplify the fuel system. The in-line filters were removed and replaced with the gascolator.
Date: 03/25/2011
Views: 4245
|
|
|
|
DoorSupportMod61Ann
Date: 04/23/2006
Views: 4241
|
|
|
Front fuse conduit run 3.
Date: 08/20/2010
Views: 6846
|
|
|
|
PilotDoorIssue00Ann
Date: 05/01/2005
Views: 4144
|
|
|
IMAG0260
Date: 11/30/2012
Views: 16408
|
|
