|
|
DSCF0001_001
Date: 07/27/2009
Views: 4676
|
|
|
Mod 26
Date: 08/26/2010
Views: 4203
|
|
|
|
Wing fairing 2 BID joint
Date: 11/23/2010
Views: 2365
|
|
|
Pneumatic tube abraision resistance 8.
Date: 06/12/2010
Views: 4863
|
|
|
|
IMG_1910
Date: 10/11/2004
Views: 8837
|
|
|
IMG_1578ann
2011 03 11 Installation of the parking brake valve completed and the brake lines attached. Hard to believe that took all day...
Date: 03/11/2011
Views: 3377
|
|
|
|
DSCN6574
Date: 10/25/2009
Views: 3883
|
|
|
36_G
Date: 06/19/2009
Views: 4686
|
|
|
|
Flap_Motor_Installation_15
Date: 11/27/2007
Views: 4411
|
|
|
IMG_7441post
Here's a look at the tubing end of the two fittings. Again, similar, but not the same. Can't use the original fitting with the new tubing.
Date: 03/19/2010
Views: 3885
|
|
|
|
101002_lock
Date: 12/31/1969
Views: 3761
|
|
|
PilotDoorIssue17Ann
Date: 05/17/2005
Views: 3911
|
|
|
|
IMGA0673
Nicely shaped and blended in. The pipe sticking out runs all the way through the blocks and is to carry the wires from the fuselage to the wing tips for nav/strobe and hopefully landing lights
Date: 04/18/2013
Views: 97545
|
|
|
IMG_0421
Date: 09/24/2005
Views: 5303
|
|
|
|
DSCN5239
Date: 11/29/1999
Views: 5593
|
|
|
Wing_Dolly_3_Forward_Spar_Stow
Date: 12/31/1969
Views: 5131
|
|
|
|
IMG_7939Ann
Date: 06/28/2008
Views: 4663
|
|
|
IMG_5751post
Date: 08/09/2009
Views: 5692
|
|
|
|
IMG_1469p
Cleaned up the tunnel area.
Date: 06/05/2011
Views: 4035
|
|
|
IMG_2601
I took the float bowl off the starboard carb and removed the old gasket. The instructions with the new nitrile gasket said to apply some grease to hold the gasket in place while the bowl was replaced. I didn't have any grease but I had some light oil wh
Date: 05/30/2012
Views: 4361
|
|
