|
IMG_6346Ann
Date: 12/01/2007
Views: 3044
|
|
|
Wings on 3
Just had to get all the pitot/static lines and wing lighting wiring tucked into the wing root properly or they don't fit.
Date: 07/01/2011
Views: 3328
|
|
|
IMG_0733
Date: 11/03/2005
Views: 2773
|
|
|
DSCN6073
Date: 10/11/2009
Views: 2892
|
|
|
IMGA0050
Most important.........Try to get the wife involved !!
Date: 11/13/2012
Views: 6988
|
|
|
Jos pic S+F 2005.
Date: 04/14/2005
Views: 2795
|
|
|
IMG_0004
Date: 05/06/2007
Views: 3463
|
|
|
IMG_2280
Date: 03/02/2005
Views: 3325
|
|
|
GJ7I2155
Date: 07/04/2006
Views: 2882
|
|
|
LowTempOven03
Date: 04/29/2003
Views: 3851
|
|
|
GJ7I2453_1
Date: 07/09/2006
Views: 2277
|
|
|
DSCF0077
Date: 04/02/2009
Views: 2269
|
|
|
IMG_0942Ann
Date: 07/29/2007
Views: 3371
|
|
|
dsc08626
Put in a 2x4 in the main wing spar tunnel and located the pins. This was only used to aid in keeping the plane from tipping.
Date: 04/14/2012
Views: 9713
|
|
|
DSCN8250
Date: 09/18/2010
Views: 2897
|
|
|
dsc08640
OK not the best shot but here you can see I used the jack to move the rear rib in place under the airframe being careful not to pinch the belly. I then secured the rib in place but using some drywall screws in the 2x6. This way any weight will be transf
Date: 04/15/2012
Views: 7034
|
|
|
MG_2984
Date: 03/17/2008
Views: 2781
|
|
|
DSCN5483Ann
Date: 01/20/2007
Views: 2797
|
|
|
092902_tailplane
Date: 12/31/1969
Views: 2737
|
|
|
Flap extension 15
Date: 11/07/2013
Views: 3168
|
|