|
|
IMG_0288Ann
Date: 03/21/2009
Views: 7587
|
|
|
24_04_08_vliegfoto_s_083
Date: 04/26/2008
Views: 3426
|
|
|
|
DSC_0227
Date: 05/15/2008
Views: 5798
|
|
|
DSCN3867
Date: 09/30/2005
Views: 4542
|
|
|
|
21082003203818_G
Date: 12/31/1969
Views: 4483
|
|
|
Rob Niels.
Date: 04/22/2006
Views: 7961
|
|
|
|
DSCN6333
Date: 10/11/2009
Views: 5015
|
|
|
IMG_8247Ann
Date: 07/21/2008
Views: 5726
|
|
|
|
IMG_3213
As an aside, while trouble shooting this problem, I decided to try and get the differential pressure gage working. Spent quite a bit of time on this over a year ago but could never get it to work. Anyway, I reinstalled the differential sensor unit and p
Date: 05/17/2012
Views: 6699
|
|
|
DSCN5280Ann
Date: 12/19/2006
Views: 4411
|
|
|
|
112302_Cliffspraying
Date: 12/31/1969
Views: 4533
|
|
|
CH17_28
Date: 12/31/1969
Views: 5858
|
|
|
|
DSC00864
Date: 04/15/2005
Views: 5694
|
|
|
050502_latch
Date: 12/31/1969
Views: 3991
|
|
|
|
IMG_7382ann
The problem... The AN816 provided with the brake does not properly fit the threaded hole in the brake slave cylinder. It will screw in about two threads and that's all. You can see that the 90 degree hose end also sticks up in a big loop just waiting f
Date: 03/07/2010
Views: 6207
|
|
|
Paul's firewall 8.
Date: 02/21/2010
Views: 6406
|
|
|
|
Tailplane_21
Date: 01/23/2006
Views: 4632
|
|
|
dscn0284
Date: 12/31/1969
Views: 4382
|
|
|
|
dscn1057
Date: 12/31/1969
Views: 4257
|
|
|
dsc09018
Started to make the axle jig. Used a simple setup of first taking large flat blocks of wood and caulking it to the floor somewhere over FS70. Then that allows me to fix the aluminum angle with a single screw once in its final position.
Date: 01/10/2013
Views: 22250
|
|
