|
|
CH23_23
Date: 09/11/2005
Views: 5059
|
|
|
dsc08618
Block and tackle used to hoist the front of the aircraft to aid in creating a jig. This hoist reduces the weight to 25%.
Date: 04/14/2012
Views: 35851
|
|
|
|
Missing foam layup 5.
Date: 04/05/2009
Views: 5872
|
|
|
DSCN5739Ann
Date: 04/16/2007
Views: 5068
|
|
|
|
IMG_0016
Date: 05/24/2007
Views: 8274
|
|
|
Flap Mark Location
Here's where they ended up, the 27.25" inboard from the outboard end of the flap.
Date: 07/01/2011
Views: 5200
|
|
|
|
IMG_2454
I had some maple veneer from another project which came in handy to cover the sheet aluminum plates. I think it's much more attractive than painted aluminum.
Date: 10/24/2011
Views: 5273
|
|
|
DSCN5975Ann
Date: 05/04/2007
Views: 3944
|
|
|
|
IM002757
Date: 10/30/2007
Views: 7673
|
|
|
Panel population 5.
Date: 03/01/2010
Views: 5809
|
|
|
|
24_04_08_vliegfoto_s_015
Date: 04/26/2008
Views: 3436
|
|
|
DSCF0057
Date: 10/27/2009
Views: 6041
|
|
|
|
IM003668
Date: 11/28/2007
Views: 5825
|
|
|
IMG_3401
Date: 10/24/2010
Views: 6970
|
|
|
|
DSCN5416
Date: 07/18/2009
Views: 9424
|
|
|
Door 2.
Date: 09/22/2009
Views: 5019
|
|
|
|
IMG_0840post
And now we have brakes again. Doesn't sound like much, but that's about an hour and a half since arriving at the airport. Pulled the aircraft back out, climbed in, strapped up and went through the start up check list. Turned the radios on and checked w
Date: 01/22/2010
Views: 4702
|
|
|
I failed a bearing on purpose
Date: 11/27/2013
Views: 13882
|
|
|
|
Mod_73_access_001
Date: 08/04/2007
Views: 5531
|
|
|
11_1_vacum_bagging
Date: 12/31/1969
Views: 4192
|
|
