|
|
IMG_3278
And the float bowl back in place, with no gasket sticking out anywhere. Then it was torqued down and safety wired. Both drip trays were then re-installed. Lastly, I ran the electric fuel pump for several minutes (at 6 PSI according to the gage) and che
Date: 05/30/2012
Views: 6904
|
|
|
DSC_0265
Date: 05/15/2008
Views: 5294
|
|
|
|
DSCN5100
Date: 11/29/1999
Views: 6973
|
|
|
dsc09047
I took cardboard and bent it around the socket and overlapped per the manual. Then took this cardboard and made a new template for cutouts. This made the layups go really quick.
Date: 01/23/2013
Views: 19278
|
|
|
|
Intercooler07
Date: 01/07/2006
Views: 7239
|
|
|
Gap fill 5.
Date: 10/28/2009
Views: 5514
|
|
|
|
DSCN6351
Date: 10/11/2009
Views: 5522
|
|
|
DSCF0055_001
Date: 08/18/2009
Views: 5077
|
|
|
|
InstrumentPanelX2Ann
Date: 03/26/2006
Views: 4508
|
|
|
IMG_2510
Date: 04/25/2006
Views: 6445
|
|
|
|
Fitting_Wings_04
Date: 06/07/2007
Views: 7242
|
|
|
Warp down to 3/8" from 3/4".
Date: 01/17/2010
Views: 9868
|
|
|
|
IMGA0024
Date: 09/18/2014
Views: 67233
|
|
|
24_04_08_vliegfoto_s_035
Date: 04/26/2008
Views: 3502
|
|
|
|
DSCN6028Ann
Date: 05/06/2007
Views: 5687
|
|
|
IMG_0137Ann
Date: 12/19/2008
Views: 5582
|
|
|
|
IMG_7759Ann
Date: 06/13/2008
Views: 4297
|
|
|
A123 used to jumpstart
Date: 03/09/2011
Views: 4723
|
|
|
|
IMG_3043
Date: 09/30/2016
Views: 36951
|
|
|
IMG_2283
Date: 03/04/2005
Views: 6473
|
|
