|
|
Aft fuse conduit run 17.
Date: 01/01/2011
Views: 9088
|
|
|
PortAileronHinges02
Date: 06/06/2003
Views: 6490
|
|
|
|
zu_coy_2
Date: 08/31/2008
Views: 6208
|
|
|
dsc09040
The gap from the bottom of the socket and the belly is as you see. The only way to get it all the way down was to lower the belly to 15" which was not considered an option. Belly hight is 16.0" with the axle width at 82.50" and axle cent
Date: 01/23/2013
Views: 20775
|
|
|
|
DSCN6480
Date: 10/25/2009
Views: 5202
|
|
|
WingSet35
Date: 07/20/2004
Views: 3623
|
|
|
|
Aluminum Plenum flanges installed
Aluminum flanges were added to the plenums so that the plenums would not need to be fastened directly to the hot heads. Later in the build, the pop rivets were replaced with machine screws so that the front 2/3 of the plenum could be easily removed
Date: 01/01/2011
Views: 195984
|
|
|
Baggage_Area_15
Date: 06/03/2007
Views: 7344
|
|
|
|
p1000701
p1000701.jpg
Date: 03/12/2012
Views: 12581
|
|
|
IMG_1103
Date: 03/17/2004
Views: 6846
|
|
|
|
Dynamic prop balancer also Smart Ass guy offers one 5
Date: 08/19/2010
Views: 4566
|
|
|
Short #1 Phillips 3.
Date: 12/29/2009
Views: 5966
|
|
|
|
LL1
Date: 01/15/2009
Views: 6397
|
|
|
DSC_0178
Date: 09/21/2007
Views: 6216
|
|
|
|
DSCN6463
Date: 10/25/2009
Views: 5092
|
|
|
DSCN6361
Date: 10/11/2009
Views: 5272
|
|
|
|
Port_hdrst_8
Date: 03/11/2009
Views: 6729
|
|
|
G_HOFC_Mont_Blanc
Date: 08/19/2005
Views: 5719
|
|
|
|
IMG_6484post
Date: 09/07/2009
Views: 8001
|
|
|
DSCN6159
Date: 10/11/2009
Views: 5332
|
|
