|
|
DSCN4979Ann
Date: 12/04/2006
Views: 3941
|
|
|
Tailplane_78
Date: 01/23/2006
Views: 3413
|
|
|
|
Tie-bar 6.
Date: 11/10/2010
Views: 8490
|
|
|
IMG_6153post
Date: 08/09/2009
Views: 4619
|
|
|
|
IMG_1673
Used the beading machine to turn down the edges of the console cover. That added a lot of stiffness and looks better as well. Then painted it grey to match the grey interior.
Date: 04/28/2011
Views: 4372
|
|
|
BondPortTail04Ann
Date: 06/24/2004
Views: 4104
|
|
|
|
Aligning_wings_pins_06
Date: 04/15/2006
Views: 6356
|
|
|
Dolly 5
Date: 02/14/2014
Views: 12545
|
|
|
|
GMA340PinoutAnn
Date: 08/07/2007
Views: 4849
|
|
|
IMG_6401
Date: 03/20/2017
Views: 9564
|
|
|
|
MG_1478
Date: 07/09/2006
Views: 5649
|
|
|
IM002767
Date: 10/30/2007
Views: 7394
|
|
|
|
MG_1673
Date: 07/09/2006
Views: 3978
|
|
|
1_24_06_28
Date: 11/29/1999
Views: 5967
|
|
|
|
DSCN5002Ann
Date: 12/06/2006
Views: 4558
|
|
|
IMG_2326
Date: 07/22/2007
Views: 4422
|
|
|
|
Pin and striker upper aft 2.
Date: 12/11/2009
Views: 5447
|
|
|
dsc09040
The gap from the bottom of the socket and the belly is as you see. The only way to get it all the way down was to lower the belly to 15" which was not considered an option. Belly hight is 16.0" with the axle width at 82.50" and axle cent
Date: 01/23/2013
Views: 19522
|
|
|
|
DSC_0297
Date: 05/15/2008
Views: 5780
|
|
|
2005_1_2_18
Date: 02/04/2009
Views: 4020
|
|
