|
|
IMG_2856
Date: 12/03/2008
Views: 5835
|
|
|
ruuud_2
Date: 05/31/2009
Views: 7159
|
|
|
|
IMG_7027
The underside of the fuel tank is covered in plastic wrap which will prevent the tank from bonding to the epoxy in the micro.
Date: 10/30/2013
Views: 9540
|
|
|
Matco Jamar Brake Setup.jpg
Date: 03/21/2010
Views: 4308
|
|
|
|
Landing_Gear_09
Date: 01/23/2006
Views: 5966
|
|
|
Right_Plenum_front
Right Plenum, Front View
Date: 07/09/2012
Views: 152568
|
|
|
|
IMG_0134
Date: 04/14/2005
Views: 5154
|
|
|
CH28_13
Date: 07/18/2006
Views: 5471
|
|
|
|
dsc08642
From the start the airframe was sitting 2.5 deg tail low and 0.1 deg to port. Not bad for just putting her on there. I jacked up the back of the trailer to get it as near to 0.0 as possible and also shifted the airframe latterly to turn that .1 to 0.0 a
Date: 04/15/2012
Views: 27740
|
|
|
IMG_1118
Date: 08/13/2009
Views: 7770
|
|
|
|
DSCN6162Ann
Date: 06/24/2007
Views: 6084
|
|
|
DSCN6466
Date: 10/25/2009
Views: 5806
|
|
|
|
CH20_2
Date: 12/31/1969
Views: 3836
|
|
|
ExpancelTest00
Date: 06/19/2004
Views: 6308
|
|
|
|
IMG_2358
Date: 08/06/2005
Views: 5008
|
|
|
IMG_1167ann
Went to the hanger after work and put the brake back together. Seems to work fine. I have not safety wired it yet as I want to add fluid, bleed and give it a good test beforehand. When all tests wel,l with no leaks, I'll wire it up. Could have used a
Date: 04/19/2010
Views: 4619
|
|
|
|
DSC01172_Texted_001
Date: 12/31/1969
Views: 5853
|
|
|
ELT_BNC_90_1
Date: 04/22/2009
Views: 8289
|
|
|
|
DSCF0680
Date: 08/01/2003
Views: 7095
|
|
|
IMG_7894Ann
Date: 06/27/2008
Views: 4288
|
|