|
|
DSCN4007
Date: 10/31/2005
Views: 4791
|
|
|
p1000729
p1000729.jpg
Date: 03/12/2012
Views: 10720
|
|
|
|
CH11_3
Date: 12/31/1969
Views: 6216
|
|
|
Bat4
Date: 01/15/2009
Views: 5539
|
|
|
|
DSCN5232
Date: 11/29/1999
Views: 5456
|
|
|
110_1003_IMG
Date: 02/09/2004
Views: 5509
|
|
|
|
IMG_0034post
Date: 09/01/2010
Views: 4750
|
|
|
Flap extension 5
Date: 10/30/2013
Views: 4723
|
|
|
|
dsc09045
Uncle Kim at work. We would tilt to starboard to work on the port side vice versa.
Date: 01/23/2013
Views: 20472
|
|
|
New MC-4A 05
With the attach fitting fully screwed on to the end of the thread, the last bit of thread is just visible in the fitting.
Date: 04/12/2012
Views: 3645
|
|
|
|
Throttle 2.
Date: 07/25/2009
Views: 4570
|
|
|
OutriggerMod00
Date: 03/29/2004
Views: 4501
|
|
|
|
second_flight_5
Date: 07/19/2007
Views: 3673
|
|
|
IMG_2601
I took the float bowl off the starboard carb and removed the old gasket. The instructions with the new nitrile gasket said to apply some grease to hold the gasket in place while the bowl was replaced. I didn't have any grease but I had some light oil wh
Date: 05/30/2012
Views: 4372
|
|
|
|
Door 1.
Date: 09/22/2009
Views: 4134
|
|
|
Port wing UNI layup.
Date: 10/02/2010
Views: 10662
|
|
|
|
Jeff_1
Date: 07/25/2009
Views: 5430
|
|
|
IMGA0199
Date: 05/06/2015
Views: 27201
|
|
|
|
IMG_0047
Date: 03/21/2007
Views: 5295
|
|
|
IMG_6873Ann
Date: 03/02/2008
Views: 4328
|
|
