DoorSupportMod03Ann

Took out the parts to the door strut mod. Completed the shaping of the upper struts. Completed the shaping of the door attachment tabs. Drilled the bolt-hole in each of the attachment tabs. Mixed a small batch of Araldite 420 A/B and added milled glass for strength and to thicken. Scuff sanded the bonding areas, applied the Araldite/milled mix and used a G-clamp to hold them in place till the bond sets.

I ended up not using any of my variations to this Mod. I used the Europa reversed position with a replacement door attachment.