We completed the Vertex VXA 700 handheld harness to plumb it to our PS Engineering PMA 4000 audio panel.
On right side near penny you can see a spare Panasonic DPDT relay.
On the left side we bundled the relay into a beautiful mid harness entity. Inside it has a few pieces of thin CF rod and some CF reinforced model aeroplane Golden Rod. The relay is mounted to a small piece of perf board where wires are not directly connected to fragile relay pins.
After a few plies of adhesive lined heat shrink tube, (and some silicone tape for good measure), harness was tested and is now blessed to be flight ready!
Y10-08-15
