|
Filled with Aeropoxy light port.
Date: 09/03/2009
Views: 3438
|
|
|
Good old hack saw was used to do the deed, indeed.
Date: 10/07/2009
Views: 3434
|
|
|
Transfer mark from top to bottom of door tangs.
Date: 10/09/2009
Views: 3433
|
|
|
Tried to cut door hinges in Makita chop saw.
Date: 10/07/2009
Views: 3409
|
|
|
Drawer closer 1.
Date: 08/17/2010
Views: 3407
|
|
|
Door tang and hinge drilling tools 3.
Date: 11/01/2009
Views: 3403
|
|
|
Outboard strut anchor 1.
Date: 12/01/2009
Views: 3389
|
|
|
Drawer closer 9.
Date: 08/17/2010
Views: 3377
|
|
|
Mid door pin and striker for port door 4.
Date: 12/28/2009
Views: 3375
|
|
|
Bonding shoot bolt bushings 1.
Date: 11/01/2010
Views: 3357
|
|
|
Each hinge is slightly different in size, and pins are as large as they can be.
Date: 10/07/2009
Views: 3356
|
|
|
Outboard strut anchor 3.
Date: 12/01/2009
Views: 3350
|
|
|
Mid door pin and striker for port door 3.
Date: 12/28/2009
Views: 3346
|
|
|
Port front spacer perfectly bonded in position.
Date: 10/14/2009
Views: 3335
|
|
|
Striker drilled 6 degrees from neutral.
Date: 12/12/2009
Views: 3325
|
|
|
Holes are only 1/16" to allow proper countersinking of top tang.
Date: 10/12/2009
Views: 3287
|
|
|
Door mechanism cover install 1.
Date: 11/06/2010
Views: 3286
|
|
|
Careful contemplation while devising plan how to best locate hinges on port door.
Date: 10/09/2009
Views: 3282
|
|
|
Jos_10
Date: 12/20/2006
Views: 3263
|
|
|
Aft door handle 9.
Date: 11/05/2010
Views: 3258
|
|